Alliance Laundry Systems UW35P2 Manual De Operación página 32

Programming
Programming Tutorial
9. If no other supply is required, the next step
is to choose the type of wash desired and
assign it a time. For example, one might
choose a wash with standard reversing
action (Wash 1) and a time of six minutes.
a. Press the Wash key and then key 1. The
display will read "W10339."
b. Press the Enter key. The display will
read "M---S."
c. Press key 6. The display will read
"6M-00S," indicating a wash step of six
minutes.
10. Press the Enter key. The display will read
"0439," indicating that the computer is
ready for step 4.
11. A drain step usually comes next.
a. Press the Drain key. The display will
read "D10439." (Applications using
drain 2 are not available on 2-speed and
3-speed models.)
b. Then press the Enter key. The display
will read "M---S."
c. Enter the maximum time desired for the
computer to allow the machine to drain
to empty. The recommended time is
one minute. Press key 1, and the display
will change to "1M-00S," indicating a
drain step of one minute.
Note: The manufacturer does not recommend
more than one minute for a drain step. If the
machine does not drain in the amount of time
programmed, the "EMTY" alarm will
be displayed.
30
(Continued)
12. Press the Enter key. The display will now
read "0539," indicating that the computer
is ready for step 5.
13. A natural next step in the cycle might be a
warm rinse.
a. Press the Warm key and then the Rinse
key. The display will read "WR0539."
b. Press the Enter key. The display will
read "M---S."
c. Now enter the rinse duration in minutes
and seconds. A spray rinse lasting 2 1/2
minutes is an appropriate choice.
Press key 2. The display will read
"2M-00S."
Now press key 3 and key 0. The display
will read "2M-30S."
14. Press the Enter key. The display will read
"0639," indicating that the computer is
ready for step 6.
15. Step 6 in the cycle might be a warm fill to
high level for a dilution rinse.
Note: The Rinse key controls a spin-spray
rinse. However, a dilution rinse is executed
the same as a wash step without the addition
of detergents.
a. Press the Warm key (key 3) twice to
turn on two hot and two cold water
valves to reduce fill time. The display
will read "W-0639." Then press the
High key (key 3). The display will read
"WH0639."
b. Press the Enter key. The display will
read "M---S."
F232090