Subwoofer Setting Adjustment (80Hz 0); Non Fading Output (Non Fad) - Pioneer Super Tuner III DEH-P5250 Manual De Operación

Subwoofer Setting Adjustment (80HZ 0)

When the Subwoofer output is ON, you can adjust the cut-off frequency and the output
level of Subwoofer.
1. Press the AUDIO button and select the Subwoofer setting mode (80HZ 0)
in the Audio Menu.
2. Select the frequency to 50 Hz,
80 Hz or 125 Hz with the 2/3
buttons.
3. Increase or decrease the output
level with the 5/∞ buttons.
The display shows "+6" – "–6".
Note:
• You can select the Subwoofer setting mode only when Subwoofer output is switched ON in the
Subwoofer ON/OFF mode.

Non Fading Output (NON FAD)

When the Non Fading Output setting is ON, the audio signal does not pass through this
unit's low pass filter (for the Subwoofer), but is output through the RCA output.
Note:
• When the Subwoofer Controller setting is only "S/W CTL:EXT", you can switch the Non Fading
Output ON/OFF mode. (Refer to page 40.)
1. Press the AUDIO button and select the Non Fading Output ON/OFF mode
(NON FAD) in the Audio Menu.
2. Switch the Non Fading output
ON/OFF with the 5/∞ buttons.
All manuals and user guides at all-guides.com
32