Monitor; 6�1 Safety Instructions - Renfert EASY view 3D Traducción Del Manual De Instrucciones Original

Black & white / color sub-menu
The following combinations are possible:
• The main image in black & white, the inserted image in color�
EN
• The main image in color, the inserted image in black & white�
• Both images in black & white�
• Both images in color�
• Exit: Closing split screen menu�
The selected combination is displayed in green�
Sub-menus - settings
The following selections are possible in this menu:
• Insert the image in the right or left corner of the monitor�
If an image is inserted from a USB flash drive, a preview of
the selected file appears in the opposite corner of the moni-
tor, see „Inserting image from a USB flash drive".
• Changing the size of the inserted image (3 sizes + full screen)�
• Displaying system information�
• Exit: Closing split screen menu�
Full screen display can also be selected from the image size
options. In this case, the 2D or 3D image is no longer visible.
5.7.1 System information
The system information sub-menu provides information on:
• The system name
• The version of the software included
If the EASY view 3D is connected to a network, the following are
additionally displayed:
• IP address
• Hostname
This information is necessary if the EASY view 3D is to be inte-
grated into a network in order to gain access to the images on the
USB flash drive via this network.
6

Monitor

Renfert recommends not changing the factory settings of the monitor as the basic settings for the EASY
view 3D�
6.1 Safety instructions
Commissioning
► Do not close off the ventilation openings.
► Place the monitor in a well-ventilated place to avoid overheating.
► Only use accessories specified by the manufacturer or included with the monitor.
► Select a location where the monitor will not be exposed to extreme temperatures, high humidity,
direct sunlight or dusty environments. Avoid proximity to equipment that generates strong mag-
netic fields.
Water and moisture
► Do not operate the monitor near water. To reduce the risk of fire and electric shock, do not expose
the monitor to rain or moisture.
Power cord and power cord connection
► Install the power cord so that it will not be walked on or damaged. Take into account the location
of the cables, plugs, sockets and connector on the monitor.
- 14 -
Fig. 23
Fig. 24
Fig. 25
Fig. 26