I/O Pcb Check; I/F Initialize - NAMCO PANIC PARK Manual Del Operador

6-3-3-1 I/O PCB Check

1. Select 'I/O PCB CHECK' from the I/O Test Screen. The following
screen is displayed:-
DIP 4
LINK
I/O PCB CHECK
Master TX 3536 NAMCO LTD.
PANIC PARK ; Ver1.00 ; JPN
1/0 PCB CONNECT OK NAMCO LTD.
ASCA-4
EXIT

6-3-3-2 I/F Initialize

1. Select 'I/F INITIALIZE' from the I/O Test Screen to initialize the swing
lever potentiometers.
2. Move both levers fully to their left and press the start button. Repeat
with both levers fully right and then both levers in the centre of their
travel.
Note: Do not force the levers to the left or right as the rubber
bumpers will be compressed and give a false reading.
I/O TEST
12345678 [ON:RED]
ON 2
ENTER SW : ENTER
Page 45