Replacing The Rays Pcb - NAMCO VAMPIRE NIGHT DX Manual Del Operador

7-7

Replacing the RAYS PCB

1. Remove 4off button head screws (M6x25) and remove the Maintenance Cover.
Flat washer
Gun stand Assy
2. Remove 2off button head screws (M5x10) and remove the Rays Cover.
Gun stand Assy
3. Disconnect the connectors (x6) and remove the RAYS R PCB.
RAYS-R PC board
4. Reassemble in reverse order.
Button head screws (M6x25)
Button head screws (M5x10)
×
Cap screws (M) (M3 6)
Connectors (
Page 72
Flat washer
Maintenance cover
RAYS cover
×
6)