Initialization - NAMCO PANIC PARK Manual Del Operador

7. INITIALIZATION

Adjustments when Replacing Parts
The following operation must always be performed after replacing the Game
PCB, Rom, or Control Potentiometers.
The game will not operate correctly if these adjustments are not made.
Note: Do not force the levers to the left or right as the rubber bumpers
will be compressed and give a false reading.
1. Slide the TEST switch ON while pressing the SERVICE switch or enter I/F
INITIALIZE from the I/O TEST. The following screen is displayed.
2. Move both levers fully left and press either the left or right start button.
3. Move both levers fully right and press either the left or right start button.
DIP 12345678 [ON:OFF]
MOVE BOTH JOYSTICKS LEFT,
THEN PRESS BUTTON.
EXIT
SELECT SW : CHOOSE
ENTER SW : ENTER
DIP 12345678 [ON:OFF]
MOVE BOTH JOYSTICKS LEFT,
THEN PRESS BUTTON.
MOVE BOTH JOYSTICKS RIGHT,
THEN PRESS BUTTON
EXIT
SELECT SW : CHOOSE
ENTER SW : ENTER
Page 50
I/F INITIALIZE
[L] 0000 [R] 0000
I/F INITIALIZE
[L] 0000 [R] 0000
[R] 0000 [L] 0000