Replacing The Potentiometers - NAMCO PANIC PARK Manual Del Operador

8-5 Replacing the Potentiometers

1. Remove the control panel cover
2. Disconnect the potentiometer connector.
3. Place the swing lever of the potentiometer to be replaced to the centre of
the machine.
4. Slacken the grub screw (M4x8) and remove the potentiometer complete
with mounting bracket.
5. Replace the potentiometer.
6. Reassemble in reverse order.
Note: When refitting the potentiometer ensure that the locating tab of the
potentiometer engages in the hole in the mounting bracket and the grub
screw engages on the flat of the potentiometer shaft.
(see section 8-2 page 54).
Page 57