Selecting A Location - STACK-ON PS-15-20-B Instrucciones

SELECTING A LOCATION

e safe must be mounted to a wall stud, and to
a permanent shelf or the oor. For optimal
safety and security, the safe should be installed
in an isolated, dry and secure area.
THE SAFE SHOULD ALWAYS BE KEPT
OUT OF THE REACH OF CHILDREN.
SECURING THE SAFE
NOTE: is safe must be mounted to a wall stud,
and to a permanent shelf or the oor. Failure to
do so will compromise the safety and security of
the safe.
NOTE ON LOCKING THE SAFE:
needs to be in an upright position, as shown in
gure 1, for the locking mechanism to function
properly. Failure to mount the safe in the correct
upright position will compromise the safety and
security of the safe.
PS-15-20-B
Figure 1
Secure the safe to a wall stud, and to a permanent
shelf or oor, using the predrilled mounting holes in
the safe.
NOTE:
one side of the safe in the top and bo om holes in
the back of the safe so that it is anchored to the
wall stud in two locations. Wall anchors should be
used on the other side.
mounted to a permanent shelf or the oor. Use the
hardware provided or consult your hardware
retailer for fastening hardware for your particular
mounting surfaces.
Mark the holes to be used. Drill the appropriate
diameter and depth of pilot holes depending on
the type of hardware being used and the mounting
surface.
Secure the safe with the fasteners. (Figure 2)
e safe
PS-15-10-B
e safe must be secured to a wall stud on
PS-15-10-B
Figure 2
e safe should also be
PS-15-20-B
40542-1507
4
21