Description Of The Control Unit - V2 PD5 Manual Del Usuario

DESCRIPTION OF THE CONTROL
UNIT
The digital control unit PD5 - PD7 is an innovative
V2 ELETTRONICA product that guarantees a
safe and reliable automation of leaf swing or
sliding gates.
The PD5 - PD7 has been designed to realize a
product that meets all kind of requirements, with a
highly versatile control unit that satisfies all the
necessary requirements for a functional and
efficient installation.
PD5 - PD7 is provided with a display that, not
only makes programming simple, but also allows
a continuous monitoring of the input statuses; in
addition, thanks to a menu structure, the working
schedule and the operation logic can be set
easily.
With regard to the European regulations
concerning electrical safety and electromagnetic
compatibility (EN 60335-1, EN 50081-1, and EN
50082-1), PD5 - PD7 is characterized by a
complete isolation between the digital
circuit and the power circuit.
Other characteristics:
• Automatic relay zero-current switching control.
• Wave choke power adjustment.
• Warning light showing the status of the gate.
• Programmable logic auxiliary relay for courtesy
lights or other use.
A total compatibility with the Personal Pass
system allows to:
• Use the whole range of memory modules
(from 318 to 1000 different remote codes that
can be stored).
• Delete one or more codes in the memory.
• Delete, with a single action, all the codes in
the memory and insert other ones.
• Use control devices such as:
IDENTIFICATION UNIT VRD
WIRED DIGITAL SELECTOR TTNC.
By means of the PROG2 portable programming
device and of the WINPPCL / PPCL software, any
action can be promptly performed and all the
necessary data for a complete plant management
can be changed, filed, and printed.
A specially provided plug-in connector allows
insertion of a MT433 series receiver, having a
high sensitivity super heterodyne architecture.
ATTENTION: it is necessary to turn off
the control unit power before doing the
operations mentioned here below. Please pay
attention to the way you connect the
removable modules.
PLUGGING THE RECEIVER
MODULE IN
PLUGGING THE MEMORY MODULE
IN (MEM200, MEM200I, MEM1000,
MEM1000I)
25