Function Table Pd5 - Pd7 - V2 PD5 Manual Del Usuario

DISPLAY DATA
dEF no / Si
t.AP1 0 ÷ 120 s
t.AP2 0 ÷ 120 s
t.APP 0 ÷ t.AP1
t.Ch1 0 ÷ 120 s
t.Ch2 0 ÷ 120 s
t.ChP 0 ÷ t.Ch1
t.C2P 0 ÷ t.ChP
r.AP 0 ÷ 120 s
r.Ch 0 ÷ 120 s
t.SEr 0 ÷ 120 s
t.ASE 0 ÷ t.SEr
t.inv 0 ÷ 120 s
t.PrE 0 ÷ 120 s
t.rAL 0 ÷ 120 s
t.CvE 0 ÷ 120 s
Pot. 30 ÷ 100% Motor power
SPUn no / Si
St.AP
no
ChiU
PAUS
St.Ch
Stop
APEr
St.PA
no
ChiU
SP.AP
no
ChiU
PAUS
Ft.PA
r.PAU
t.PCh
Ch.AU
no
t.PAU
Luci
CiCL
t.LUC
AUS
tiM
biSt
Mon
PD5 - PD7 FUNCTION TABLE
DESCRIPTION
Load V2 ELETTRONICA standard data
Gate 1 opening time
Gate 2 opening time
Opening time of pedestrian gate
Gate 1 closing time
Gate 2 closing time
Closing time of pedestrian gate
Closing time gate 2 during pedestrian cycle
Gate delay during opening
Gate delay during closing
Lock time
Lock advance time
Backlash time
Pre-flashing time
Slowing down time (PD5 only)
Fast closing time after slowing down during closing (PD5 only)
Start off
Start in opening
- Start command is not available
- Command close gate
- Stop the gate and goes in pause
Start in closing
- Start command stop the gate
- Start command open the gate
Start in pause
- Start command is not available
- Start command closes the gate
Pedestrian in opening
- Pedestrian start command is not available
- Pedestrian start command closes the gate
- Gate goes in pause
Photocell in pause
- Pause time recharged
- Gate stop for a time to be set between 0 to 120 s
Automatic closing
- Automatic closing not available
- Reclosing is available, the standstill time is set from 0 to 999 s
Courtesy Light (PD5 only)
- Lights are on trough the whole cycle
- Lights start time adjustable from 0 to 999 s
- Auxiliary output
- Timed aux out (from 0 to 999 s)
- Aux out relay with bistable functioning
- Aux out relay with monostable functioning
43
DEFAULT MEMO
DATA DATA
no
22.5
22.5
6.0
23.5
23.5
7.0
0.0
1.0
3.0
3.0
0.0
0.0
1.0
0.0
0.0
40
Si
PAUS
StoP
ChiU
PAUS
r.PAU
no
60 s