Maintenance And Service; Battery Maintenance; After-Sales Service And Application Service - Bosch UniversalGrassCut 18 Manual Original

30 | English
Problem Possible Cause
Clamping ring incorrectly positioned
Cutting system damaged
Clamping ring worn
Battery and charger
Problem Possible Cause
Flashing red battery Battery not (properly) inserted
charge indicator
Battery contacts contaminated
No charging procedure
possible
Battery defective
Battery charge indicat- Mains plug of battery charger not plugged in
ors do not light up (properly)
Socket outlet, mains cable or battery charger de-
fective

Maintenance and Service

Before any work on the garden product itself (e. g.
u
maintenance, tool change, etc.) as well as during
transport and storage, remove the battery from the
garden product. There is danger of injury when uninten-
tionally actuating the On/Off switch.
Maintenance, Cleaning and Storage
For safe and proper working, always keep the product
u
clean.
For safe and proper working, always keep the garden tool
and the ventilation slots clean.
Never spray the garden tool with water.
Never immerse the garden tool in water.
Store the garden product in a secure, dry place, out of the
reach of children.
Do not place other objects on the garden product.
Make sure that the clamping ring is always attached to the
spool during use. Otherwise, high vibrations may occur.

Battery Maintenance

Use the following procedures to enable optimum usage of
the battery:
– Protect the battery against moisture and water.
– Store the machine and battery only within a temperature
range between –20 °C and 50 °C . As an example, do not
leave the battery in the car in summer.
– It is recommended that the battery is not stored within
the product but stored separately.
– Do not leave the battery in the product in direct sunlight.
– The ideal storage condition for the battery is 5 °C.
– Occasionally clean the venting slots of the battery using a
soft, clean and dry brush.
F 016 L81 803 | (28.02.2019)
Corrective Action
Reposition clamping ring.
Contact Bosch customer service agent.
Purchase new spool accessory with clamping
ring.
Corrective Action
Properly insert battery in charger.
Clean the battery contacts (e. g. by inserting and
removing the battery several times) or replace
the battery.
Replace the battery.
Insert mains plug (fully) into the socket outlet.
Check the mains voltage; have the battery char-
ger checked by an authorised after-sales service
agent for Bosch power tools.
A significantly reduced working period after charging indic-
ates that the battery is used and must be replaced.
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Bosch Power Tools