Mettler Toledo IND246 Guia De Instalacion página 44

8. Peel the cut sheath off the inner braided shield, back to the cut made in step 6.
Figure 2-35: Peeling the Cable Jacket away from the Inner Braided Shield
9. Mark the inner braided shield 1"/2.5 cm from the cut end of the cable jacket.
Figure 2-36: Marking the Inner Braided Shield
10. Carefully cut around the inner shield at the cut mark, without cutting into its contents. Remove
the cut portion of the inner shield from the cable.
Figure 2-37: Removing the Inner Braided Shield
2-22 METTLER TOLEDO IND246 and IND246 POWERCELL Installation Manual 64084463 | 03 | 12/2017