Final Assembly - Luminance Brands Kathy Ireland Home CF985LBS00 El Manual Del Propietario

6.1
Screw the two Threaded Studs (supplied) into the
tapped holes in the Hanger Bracket (Figure 18).
6.2
Lift the Ceiling Cover up to the Threaded Studs and
turn until Studs protrude through the holes in the
Ceiling Cover (Figure 19).
Secure the Ceiling Cover in place by sliding
Lockwashers over the Threaded Studs and installing
the two Knurled Knobs (supplied) (Figure 19).
Tighten the Knurled Knobs securely until the Ceiling
Cover fits snugly against the ceiling and the hole in the
Ceiling Cover is clear of the Downrod (Figure 19).
WARNING
!
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box
and not pinched between the ceiling cover and the
ceiling.

6. Final Assembly

Figure 18
Figure 19
12
HANGER
BRACKET
THREADED
STUD (2)
CEILING
COVER
THREADED
STUD (2)
LOCKWASHER (2)
KNURLED
KNOB (2)
ETL Model No.: CF985L