Luminance Brands Kathy Ireland Home CF985LBS00 El Manual Del Propietario página 14

6.6
Remove one of the three #6-32 x 3/8" Truss Head
Screws with Lockwashers from the Fan Motor Assembly
(Figure 23). Retain the Screw for future installation.
Loosen the other two Screws several turns.
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the fan motor assembly and the lower
housing.
6.7
Pass the Fan Motor 2-Pin Wire Connector through the
center hole of the Lower Housing.
Install the Lower Housing onto the Fan Motor Assembly
by aligning and engaging the keyhole slots of the Lower
Housing with the loosened screw heads on the Fan
Motor (Figure 24).
Rotate the Lower Housing clockwise to engage the two
loosened screws.
With the Lower Housing locked into the keyhole slots,
tighten the two previously loosened Screws.
Reinstall the #6-32 x 3/8" Truss Head Screw with
Lockwasher (previously removed) into the Lower
Housing (Figure 24).
A spare #6-32 x 3/8" Truss Head Screw with
Lockwasher is provided in parts bag, if needed.
6. Final Assembly
(Continued)
FAN MOTOR
ASSEMBLY
Figure 23
ROTATE LOWER HOUSING CLOCKWISE
TO ENGAGE THE TWO LOOSENED SCREWS
LOWER HOUSING
Figure 24
14
REMOVE ONE #6-32 x 3/8"
TRUSS HEAD SCREW
WITH LOCKWASHER
REINSTALL ONE #6-32 x 3/8"
TRUSS HEAD SCREW WITH
LOCKWASHER
ETL Model No.: CF985L