Luminance Brands Kathy Ireland Home CF985LBS00 El Manual Del Propietario página 18

7. Optional Installation of No-Light Cover
7.3
Disengage and retain the Fan Motor 2-Pin Wire
Connector from the 2-pin Wire Connector of the LED
Light Fixture Assembly (Figure 31).
NOTE: Store the LED Light Fixture Assembly in a
safe place for future use, if needed.
7.4
Carefully tuck the Fan Motor 2-Pin Wire Connector up
close into the Lower Housing (Figure 32).
Place the No-Light Cover onto the Lower Housing
aligning the three flat areas on the top flange of the
No-Light Cover with the three dimples on the inside of
the Lower Housing (Figure 32).
Then turn the No-Light Cover clockwise until it stops
turning.
Your No-Light Cover is now installed.
WARNING
!
To avoid possible fire or shock, make sure that the
electrical connector are completely tucked inside the
lower housing and not pinched by the no-light cover.
DISENGAGE FAN
MOTOR 2-PIN WIRE
CONNECTOR
DISENGAGE LIGHT
FIXTURE ASSEMBLY
2-PIN WIRE CONNECTOR
LED LIGHT FIXTURE
ASSEMBLY
Figure 31
LOWER
HOUSING
FLAT AREA
NO-LIGHT COVER
ROTATE NO-LIGHT COVER CLOCKWISE TO
ENGAGE ON THE LOWER HOUSING DIMPLES
Figure 32
18
(Continued)
LIFT NO-LIGHT COVER UP INTO
LOWER HOUSING ASSEMBLY
ETL Model No.: CF985L