Final Assembly - Luminance Brands Kathy Ireland Home VOLTA CF590RBQ00 Manual De Instrucciones

7. How to Wire Your Ceiling Fan
7.9
Wiring Schematic for reference (Figure 32).
BLACK
TO
(HOT)
120-
VOLT
SUPPLY
GROUND
Figure 32
8.1
Lift the Ceiling Cover up to the Threaded Studs and
turn until Studs protrude through the Holes in the
Ceiling Cover (Figure 33).
Secure the Ceiling Cover in place by sliding
Lockwashers over the Threaded Studs and installing
the two Knurled Knobs (supplied in parts bag)
(Figure 33).
Tighten the Knurled Knobs securely until the Ceiling
Cover fits snugly against the Ceiling and the Hole in the
Ceiling Cover is clear of the Downrod.
WARNING
!
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling cover and the ceiling.
STANDARD ON-OFF WALL
SWITCH OR OPTIONAL
SW405 WALL CONTROL
GND
....
OFF ON
WHITE
TWO-CONDUCTOR
CABLE (WITH
GROUND)
GREEN WIRE (GROUND) FROM
HANGER BALL AND HANGER
BRACKET

8. Final Assembly

BLACK
BLACK
WHITE
WHITE
ANTENNA
BLACK or RED
BLUE
BLACK
BLUE
WHITE
HANGER BALL
Figure 33
18
(Continued)
RECEIVER
WHITE
THREADED
STUDS (2)
LOCKWASHERS (2)
KNURLED
KNOBS (2)
ETL Model No.: CF590
CEILING
COVER