Luminance Brands Kathy Ireland Home CF985LBS00 El Manual Del Propietario página 16

6.10
Install the LED Light Fixture Assembly onto the Lower
Housing by aligning and engaging the keyhole slots
of the LED Light Fixture Assembly with the loosened
screw heads on the Lower Housing (Figure 27).
Rotate the LED Light Fixture Assembly clockwise to
engage the two loosened Screws.
With the LED Light Fixture Assembly locked into the
keyhole slots, tighten the two previously loosened
Screws.
Reinstall the #6-32 x 3/8" Truss Head Screw with
Lockwasher (previously removed) into the LED Light
Fixture Assembly (Figure 27).
A spare #6-32 x 3/8" Truss Head Screw with
Lockwasher is provided in parts bag, if needed.
6.11
Place the Glass into the Lower Housing, aligning the
three flat areas on the top flange of the Glass with the
three Dimples in the Lower Housing.
Then turn the Glass clockwise until it stops and is
secure (Figure 28).
NOTE: Periodically check that the Glass is seated
fully clockwise in the Lower Housing.
Installation of your Ceiling Fan is now complete.
Proceed with installation of the Wall Control, Section 8.
Please call Customer Service at 1-800-777-4440
if you have any questions about installation and
operation of this Ceiling Fan.
6. Final Assembly
(Continued)
ROTATE LED LIGHT FIXTURE ASSEMBLY CLOCKWISE
TO ENGAGE THE TWO LOOSENED SCREWS
LOWER
HOUSING
LED LIGHT FIXTURE
ASSEMBLY
Figure 27
LIFT GLASS UP INTO
LOWER HOUSING
LOWER HOUSING ASSEMBLY
DIMPLES (3)
GLASS
ROTATE GLASS CLOCKWISE TO
ENGAGE ON THE LOWER HOUSING DIMPLES
Figure 28
16
REINSTALL ONE #6-32 x 3/8"
TRUSS HEAD SCREW WITH
LOCKWASHER
FLAT AREA
OF GLASS (3)
ETL Model No.: CF985L