4. How to Hang Your Ceiling Fan
4.4
Rotate the Retaining Strap closed (Figure 13) on the
Hanger Bracket.
Reinstall the Socket Head Cap Screw (previously
removed). Securely tighten the Socket Head Cap
Screw (Figure 13).
If you feel that you do not have enough electrical
wiring knowledge or experience, have your fan
installed by a licensed electrician.
WARNING
!
To avoid possible electrical shock, be sure electricity
is turned off at the main fuse box before wiring.
NOTE: If you are not sure if the outlet box is grounded,
contact a licensed electrician for advice, as it must be
grounded for safe operation.
5.1
Connect the Green Ground Wire from the Hanger
Ball and the Green Ground Wire from the Hanger
Bracket to the Ground Conductor of Supply (this may
be a bare wire or wire with green colored insulation).
Securely connect Wires with Wire Connectors supplied
(Figure 14).
WARNING
!
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box before wiring. All wiring
must be in accordance with National and Local codes
and the ceiling fan must be properly grounded as a
precaution against possible electrical shock.
5. How to Wire Your Ceiling Fan
Figure 13
GROUND
CONDUCTOR SUPPLY
LISTED WIRE
CONNECTOR
GREEN WIRE
(GROUND) FROM
HANGER BALL
GREEN WIRE
(GROUND) FROM
HANGER BRACKET
Figure 14
!
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product
by Luminance Brands. Substitution of parts or
accessories not designated for use with this product
by Luminance Brands could result in personal injury
or property damage.
10
(Continued)
RETAINING STRAP
HANGER BRACKET
SOCKET CAP SCREW
HEX WRENCH
WARNING
ETL Model No.: CF985L