Optional Installation Of No-Light Cover - Luminance Brands Kathy Ireland Home CF985LBS00 El Manual Del Propietario

7. Optional Installation of No-Light Cover

WARNING
!
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box before wiring. All wiring
must be in accordance with National and Local codes
and the ceiling fan must be properly grounded as a
precaution against possible electrical shock.
7.1
R e m o v a l o f L E D L i g h t F i x t u r e A s s e m b l y ,
if previously installed.
Skip to 7.4 if LED Light Fixture Assembly is NOT
installed.
Remove and retain the Glass from the opening of the
Lower Housing by turning the Glass counter-clockwise
(Figure 29).
NOTE: Store the Glass in a safe place for future use,
if needed.
7.2
Remove and retain the three #6-32 x 3/8" Truss Head
Screws with Lockwashers from the Lower Housing to
detach the LED Light Fixture Assembly (Figure 30).
NOTE: Store the #6-32 x 3/8" Truss Head Screws
with Lockwashers in a safe place for future use,
if needed.
LOWER
HOUSING
GLASS
ROTATE GLASS COUNTER-CLOCKWISE TO
DISENGAGE FROM THE LOWER HOUSING DIMPLES
Figure 29
LOWER
HOUSING
LED LIGHT FIXTURE
ASSEMBLY
Figure 30
Please contact 1-800-777-4440 for further assistance
17
REMOVE THREE #6-32 x 3/8"
TRUSS HEAD SCREWS WITH
LOCKWASHERS
luminancebrands.com
ETL Model No.: CF985L