How To Wire Your Ceiling Fan - Luminance Brands Kathy Ireland Home RAH ECO CF915TM60BS00 El Manual Del Propietario

4. How to Hang Your Ceiling Fan
4.4
Rotate the Retaining Strap closed (Figure 15) on the
Hanger Bracket.
Reinstall the Socket Head Cap Screw (previously
removed). Securely tighten the Socket Head Cap
Screw (Figure 15).
If you feel that you do not have enough electrical wiring knowledge or experience, have your fan
installed by a licensed electrician.
WARNING
!
To avoid possible electrical shock, be sure electricity
is turned off at the main fuse box or circuit breaker
panel before wiring.
NOTE: If you are not sure if the outlet box is grounded,
contact a licensed electrician for advice, as it must be
grounded for safe operation.
5.1
Connect the Hanger Ball Green Ground Wire and the
Hanger Bracket Green Ground Wire to the Supply
Ground Conductor (this may be a bare wire or wire with
green colored insulation).
Securely connect wires with Wire Connectors
(supplied) (Figure 16).
WARNING
!
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box or circuit breaker panel before
wiring. All wiring must be in accordance with National
and Local codes and the ceiling fan must be properly
grounded as a precaution against possible electrical
shock.

5. How to Wire Your Ceiling Fan

Figure 15
GROUND
CONDUCTOR SUPPLY
LISTED WIRE
CONNECTOR
GREEN WIRE
(GROUND) FROM
HANGER BALL
GREEN WIRE
(GROUND) FROM
HANGER BRACKET
Figure 16
!
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product
by Luminance Brands. Substitution of parts or
accessories not designated for use with this product
by Luminance Brands could result in personal injury
or property damage.
11
(Continued)
RETAINING STRAP
HANGER BRACKET
SOCKET CAP SCREW
HEX WRENCH
WARNING
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: CF915