Mounting - Luminaire Head; Operation - Dräger Polaris 50 Instrucciones De Montaje Y Uso

9

MOUNTING - luminaire head


Remove screw and take off the protective
cap

Insert luminaire head.

Turn sleeve to insert securing segment

Turn sleeve back and secure with screw
WARNING
Danger from falling luminaire head.

Ensure that the safety element has been
correctly installed.

An incorrectly mounted luminaire head can
cause injury.

Tighten the luminaire head's friction lock as
required

Attach hand grip.
10

OPERATION

Polaris 50 Mobile
DANGER
Electric shocks are life-threatening.

Do not insert any power cable that is
damaged.

If there is any sign of damage to the power
cable, replace it immediately with a new
one.

The supply voltage and frequency must
match the data on the type plate.

Only connect to the mains power supply
with a protective conductor
NOTE
Polaris 50 Mobile

When the power cable is not in use, reel it
onto the cable holder
1 2

Insert cable 1.

Connect cable to the power supply

Operate switch 2. There are two 1 A fuses
upstream from the switch
WARNING
Risk of eye damage
 Never look directly into the beam of light
Polaris 50 Ceiling, Wall, Mobile, CSU

Switch on luminaire using the rotary knob.
 Perform a function test before each use: All
LEDs in the light cone must illuminate
CAUTION
The rotary knob can not be removed.
EN_GB
35