Dräger Polaris 50 Instrucciones De Montaje Y Uso página 34

EN_GB

Place the upper support tube onto the lower
support tube

Screw the cable holder firmly onto the upper
support tube using the M4 socket screw (2.4
Nm / 1.8 lbf ft)
WARNING
Never unscrew the upper cable holder -
injury hazard.

When both cable holders are unscrewed,
the connecting piece is loose and falls
downward, which could lead to injury and/or
damage to the cable and/or the device.

Remove M8 hex screw on the upper support
tube

Remove cover cap with connector

Insert the spring arm and secure with M8 hex
screw, tighten as far as it will go.
34

Put the disc 1 in place first, then the retaining
ring 2.

Insert the connector with the cover cap and
screw into place

Continue with luminaire head mounting, see
Chapter 9
1
2