Idiomas disponibles
Idiomas disponibles
6. Press the button
B
A high-pitched beep is heard.
7 . Press the button
B
A high-pitched beep is heard.
8. Press the button
B
A high-pitched beep is heard.
9. Press the button
B
A high-pitched beep is heard.
10. Press the button
B
A high-pitched beep is heard.
11. Press button
B
A low-pitched beep is heard.
12. Press button
B
A low-pitched beep is heard.
13. Press the button
B
Three beeps will be heard, the settings have been stored.
14. Turn off the ignition.
B
The anti-theft alarm system is now active, the control LED
15. Press button
B
A beep will be heard. The blinkers flash briefly.
The system is now programmed, deactivated and the control LED
18
Encoding replacement keys or remote controls
New inductive keys and remote controls must be encoded to the anti-theft system. A maximum of four
remote controls and four inductive keys may be encoded on the system.
Activating the encoding function
Use a cable to connect the cable of the programming plug (cable color brown/white, see Section
Connection F) to earth (battery –).
Turn on the ignition.
Press the original key onto the control LED
B
Three beeps will be heard. The coding function is activated.
Encoding the remote controls
Press buttons
B
LED
will light up (blink rapidly) and go out after approx. 10 seconds.
Release the two buttons
B
LED
will light up.
Press either button
B
A beep will indicate that the encoding of the remote control has been successful.
Repeat the procedure for all other remote controls.
Encoding the inductive keys
Press all available keys one after the other onto the control LED
De-activating the encoding function
Turn off the ignition and detach the lead from the programming plug.
B
The remote controls/inductive keys are now operational.
(without function).
(without function).
(panic alarm ON).
(without function).
(tone type intermittent).
(automatic activation of immobilizer OFF).
(automatic activation of alarm OFF).
(without function).
on the remote control.
and
on the remote control simultaneously and keep them pressed.
and
on the remote control.
or button
.
begins to blink.
.
.
23
is off.
,
