Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Safety
Section 1
Safety Warnings
Make sure you read and understand all instructions and safety precautions
listed in this manual before installing or operating your circulator. If you
have any questions concerning the operation of your circulator or the
information in this manual, please contact us. See inside cover for contact
information.
DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury. It also alerts against
unsafe practices.
The lightning flash with arrow symbol, within an equilateral triangle, is
intended to alert the user to the presence of non-insulated "dangerous
voltage" within the circulator's enclosure. The voltage magnitude is
significant enough to constitute a risk of electrical shock.
This label indicates the presence of hot surfaces.
This label indicates read the manual.
This label indicates a flammable refrigerant is used.
Observe all warning labels.
Never remove warning labels.
Leave refrigerated baths in an upright position at room temperature
(~25°C) for 24 hours before starting. This ensures the lubrication oil
drains back into the compressor.
The circuit protector located on the rear of the circulator is not
intended to act as a disconnecting means.
Operate the circulator using only the supplied line cord. The main
power cord is used as the disconnecting device and must be easily
accessible at all time.
1-8
Thermo Scientific
Tabla de contenido
