Operating Conditions; Power Supply Specifications; Environment Operating Conditions; Device Safety Compliance - Terragene IC10FR Manual Del Usuario

Safety information
compatibility. Attaching any other device to the USB
port may damage the incubator and may not be safe
for the user.
•Do not attempt to repair the incubator by yourself,
that could lead to major and irreversible damages to
the device. In case of device malfunction, contact
your local distributor for further assistance.
To reduce the risk of using incompletely sterilized
loads:
•Please read, understand, and follow the Instructions
for Use of each SCBI before its incubation.
•Do not remove the SCBI before the incubator
reports the final readout result. Check a result ticket
is printed.
•Check that culture medium completely wets the
spore carrier.
To avoid the risk of injury, related to glass
fragments produced when crushing the glass
ampoule inside the SCBI tube:
•Cool the SCBI during the indicated time before
crushing the ampoule.
•Do not handle the SCBI excessively since this might
cause the glass ampoule to burst.
•Wear safety gloves and glasses when removing the
SCBI from the sterilizer, pressing the SCBI's
cap, and crushing the SCBI's ampoule.
•Do not use your finger for crushing SCBI. Use the
Ampoule Crusher instead.
To avoid a potentially hazardous situation:
•Avoid contact with the hot metal block inside each
incubation position.
•Do not insert your fingers, or any other element,
inside the incubation positions.
•Place only compatible indicators inside the
incubation positions.
To avoid SCBIs from absorbing fluorescent
particles:
•Avoid direct contact between the SCBIs and
Chemical Indicators or Tapes before the SCBI
incubation.
Important
Do not use this product in a manner not specified by
Terragene S.A., otherwise the protection provided
®
by the product might be affected.
Only Terragene S.A. authorized personnel can
®
access or service the internal components of the
Incubator. Parts or components inside the Incubator
should not be manipulated by the user.

Operating conditions

Power supply specifications

Input
parameters.
Voltage range
Frequency
*Current
Output parameters
Voltage
**Current
* 1 Ampere in USA and Canada.
** 3 Amperes in USA and Canada.
Terragene S.A. recommends the use of UPS instead of voltage
®
stabilizers, since they fulfill two functions: to stabilize and
maintain the energy during a power outage.

Environment operating conditions

Environmental
Conditions.
Altitude
Operation temperature
Relative humidity
Installation/overvoltage
Degree of contamination
Storage temperature
Voltage

Device Safety Compliance

Bionova IC10/20FR Auto-reader Incubator complies with the
®
following standards and directives:
Electrical Safety.
Electromagnetic
Compatibility (EMC).
European Commission.
Bionova IC10/20FR Auto-reader Incubator do not represent
®
photobiological risk and do not generate dangerous optical
radiation in any of its normal operation conditions as per the
requirements of IEC 62471 Standard.
Designed under Quality Management System standards ISO
13485:2016/NS-EN ISO 13485:2016.
IC10/20FR Page 6
Operating Units
Conditions.
(100-240) Volts
50/60 Hertz
0,2 Ampers
Values Units
12 DC Volts
4 Amperes
Operating Units.
Conditions.
3500 (máx.) Meters
10-30 Celsius
30-80 %
category II
2
10-30 Celcius
12 DC volts
IEC 61010-1
IEC 61010-2-010
Low Voltage Directive
2014/35/EU.
EN 61326-1
EMC Directive 2014/30/EU.
RoHS Directive 2011/65/EU.
WEEE Directive 2012/19/EU.