Bosch MSM8 Serie Instrucciones De Uso página 14

MSM8-Zubehör_de-ar.book Seite 14 Donnerstag, 18. Dezember 2014 9:02 09
en
Operation
The multi-function accessory is suitable for
kneading, cutting, shredding and grating food.
Always observe the maximum quantities
and processing times in the table (Fig. ).
Risk of injury from sharp blades/
rotating drive!
When working with the multifunction acces-
sory, the base unit may be switched on only
when the lid has been attached and
screwed on tight.
While the appliance is operating, never
place fingers in the mixing bowl.
Always use the pusher for adding ingre-
dients.
After switching off, the drive continues
running for a short time. Change tools
only when the drive is at a standstill.
Warning!
Multifunction accessory must be completely
assembled before use!
Caution!
Before cutting meat, remove gristle, bones and
sinews. The multifunction accessory is not
suitable for cutting very hard food (coffee
beans, radishes, nutmeg) and frozen food
(fruit, etc.).
Kneading hook/universal blade
Kneading hook for kneading small amounts
of dough
Universal cutter for cutting meat, hard cheese,
onions, herbs, garlic, fruit, vegetables, nuts,
almonds.
Always observe the maximum quantities and
processing times in the table (Fig. ).
The blade is sharp and
can cause injury!
Never grip the blades of the universal blade.
Take hold of the universal blade by the
plastic handle only.
Do not touch universal blade with bare
hands. Clean them with a brush.
Fig. 
Place bowl on a smooth and clean work

surface.
Insert blade/kneading hook.

Add food.

14
Warning!
Blade/kneading hook must be upright in the
bowl so that the lid fits correctly (Fig. =
Place lid on the bowl and turn all the way

anti-clockwise. Lock on the handle must
be correctly engaged.
If there are larger quantities of ingredients
in the bowl, it may take a little more effort
to attach the lid. If required, turn the three-
winged coupling on the underside of the lid
into the correct position.
Place the base unit on the attachment and

lock into position.
Insert pusher.

Insert the mains plug.

Hold base unit and multi-function acces-

sory firmly and switch on appliance
(turbo speed).
To add more ingredients, release the

On button. Wait until the tool comes
to a standstill.
Remove the pusher and add ingredients

through the feed tube.
Release the On button after processing.

Carrier disc with disc inserts
Slicing attachment – thick
Set speed control to maximum speed for
cutting: e.g. cucumbers, carrots, potatoes.
Slicing attachment – thin
Set speed control to maximum speed for
cutting: e.g. cucumbers, carrots, beetroot,
zucchini.
Shredding insert – medium-fine
Set speed control to high speed for shredding:
e.g. apples, carrots, cheese.
Grating disc insert – coarse (if fitted)
Set speed control to high speed for grating:
potatoes for dumplings, potato pancakes;
fruit and vegetables for raw vegetable salad.
Always observe the maximum quantities and
processing times in the table (Fig. ).
Risk of injury from sharp blade/
rotating drive!
Exercise particular caution when handling
the attachments! Note shape and location
of the insert when inserting it into the carrier
disc. Take hold of carrier disc by the
designated recessed grips only.
Do not place fingers in the feed tube.
Only use the pusher when adding more
ingredients.
Robert Bosch Hausgeräte GmbH
-3).
