Operating Instructions - NuWave Moxie Pro Manual Del Usuario

OPERATING INSTRUCTIONS

Smoothie
Smoothie
Sorbet
Sorbet
1
1
Power Button ON/OFF
Turn the red main Base Power Switch ON. Switch is located
1.
on the right side of Blender Base.
The "Power" button will flash.
•
Press "Power" button once to turn the unit on.
2.
The LED display will show the default time for the
•
selected setting. If no setting is selected the LED display
will show "0:00".
The "Start/Stop" button will flash.
•
Press "Power" button again to turn the unit off.
3.
The "Power" button will flash until the red main Base Power
•
Switch is turned off or the unit is unplugged.
Start/Stop
Turn the dial to choose the appropriate blending function.
1.
Press "Start/Stop" to start blending.
2.
Press "Start/Stop" again to stop blending.
3.
Time Setting
Press the up and down arrows to increase or decrease the
time on the display.
Times are displayed in minutes and seconds.
•
This can be done on all settings.
•
Example:
Press "Power" button. Turn dial to "Ice". "0:15" (15 seconds)
will be displayed. Press up and down arrows to adjust the time.
Press "Start/Stop".
14
Owner's Manual
ON OFF
2
2
OPERATING INSTRUCTIONS (Continued)
Pulse 1 & Pulse 2
Use either "Pulse 1" or "Pulse 2" for quick bursts of high-
1
powered blending.
Pulse 2 will have a higher RPM than Pulse 1.
•
When using either Pulse 1 or Pulse 2, the LED display will show
2 •
the default time that the dial is set to and will not change unless
the setting is changed.
Numbered Settings
For standard blending, select from one of the numbered settings
between 1 and 10.
Turn the dial to desired setting between 1 and 10. Default will be
1.
set to "3:00".
Adjust the time if desired, then press "Start/Stop" to begin blending
2.
at selected setting.
Adjust the number setting using the dial at any point while
3.
blending, if needed.
The lowest setting is #1 (5,000 RPM). The highest setting is
•
#10 (27,000 RPM).
Icon Setting
For more specialized blending tasks, select one of the preset icons with
the dial. Each icon setting has a default time and RPM built into the unit.
Turn the dial to your desired icon setting. The LED display will show the
1.
default time.
Adjust the time, if needed, then press "Start/Stop" to begin blending at your
2.
selected setting.
If desired, increase or decrease time at any point while blending.
•
Default
Icon
Min. : Sec.
1-10* 3:00
Ice 0:15
Smoothie 0:35
Smoothie
Smoothie
Sorbet 0:30
Sorbet
Sorbet
Nuts 1:30
Soup 3:00
Clean** 0:15
1 2
1 2
Min. Max.
Notes
Min. : Sec.
0:05 5:00 Adjustable speed
0:05 2:00 Ice-based drinks
0:05 2:00 Frozen drinks
0:05 2:00 Frozen desserts
0:05 2:00 Jams and spreads
Soup and hot
0:05 5:00
chocolate
0:05 2:00 Self-cleaning
15
Owner's Manual