Care & Maintenance - NuWave Moxie Pro Manual Del Usuario

OPERATING INSTRUCTIONS (Continued)
*Note:
When blending for a long period of time, steam may escape from Plunger Cap.
•
Always start with cold liquids when blending. DO NOT add hot liquids to
•
the blender.
Do not fill Jar above ¾ capacity. For best results, do not fill more than 1.5
•
liters (51 fl oz) of liquid.
**Tips for Cleaning:
Add water and 1-2 drops of liquid dish soap to the Jar, place on the Base, and
•
close the Lid.
Turn the dial to "Clean". "0:15" will be shown on the LED display. Adjust the
•
time if desired, then press "Start/Stop".
Once finished, remove the Jar, rinse thoroughly, and dry before using.
•
For detailed instructions on cleaning, see Care and Maintenance.
Moving parts may become hot with extended use.
DO NOT TOUCH.
CARE & MAINTENANCE
Before First Use:
Wash all removable parts in warm, soapy water or in the dishwasher, top rack
only. The Jar can be washed using the "Clean" function. See "Operating
Instructions" for details.
Jar Plunger
16
Owner's Manual
CAUTION
Plunger Cap
Plunger Lid
Seal Ring
CARE & MAINTENANCE (Continued)
Plunger Lid Rim
Removal of Lid Seal Ring may be necessary for cleaning or if the part
is worn, damaged, or needs replacing. To assemble:
1. Line the inside of the Lid Seal Ring into the rim.
2. Press the Seal Ring into the rim to ensure it is properly sealed.
3. Make sure the lower part of the Seal Ring lines up with the bottom side
of the rim.
Do not immerse the Moxie Base in water. Clean with
a damp sponge or cloth and wipe dry.
The power cord needs to be unplugged from the power
source before inserting or removing any attachments and
before cleaning.
Seal Ring
CAUTION
17
Owner's Manual