Assembly Guide - NuWave Moxie Pro Manual Del Usuario

ASSEMBLY GUIDE

Lid Lock Hooks Jar Tabs
(1 on each side) (1 on each side)
Plunger Lid Assembly
Line up red dot on Lid with the handle.
1.
Push down on the Lid until it sits firmly in place.
2.
The Lid Lock has two Lock Hooks that will lock the Lid in place. Make sure
3.
the two Lock Hooks line up with the Jar Tabs.
Turn the Lid Lock clockwise to close and lock.
•
To unlock, turn the Lid Lock counterclockwise.
•
Make sure all parts are securely attached.
WARNING: As with most electrical appliances, electrical parts are live even
when the Moxie Blender is off. Be sure the unit is unplugged when assembling.
12
Owner's Manual
Plunger Cap
Lid Lock
Plunger Lid
Jar
The Plunger Cap is removed
when adding additional
ingredients while blending.
Lock Unlock
CAUTION
ASSEMBLY GUIDE (Continued)
When using the Plunger
Remove the Plunger Cap from the Plunger Lid before inserting the Plunger.
The Plunger Lid is designed with the hole opening so that the Plunger does not
come into contact with blades.
When not using Plunger, place Plunger Cap in Plunger Lid by pressing down.
Plunger
Jar Assembly with the Plunger Lid
Place the Jar on Base by aligning it on top
1.
of the 4 Rubber Columns.
Press Lid down firmly onto the Jar.
2.
4 Rubber Columns
13
Owner's Manual