Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS
Getting Started
1.
Turn the red main Base
Power Switch ON. Switch is
located on the right side of
Blender Base.
• The Power button will
flash.
2.
Press Power button once
to turn your Moxie Blender
on. The LED display will
show the default time for the
selected setting.
3.
Turn the dial to choose
your appropriate blending
function.
4.
Press Start/Pause to start
blending.
5.
Press Start/Pause again to
stop blending.
6.
Press the Power button
again and press the red
main Base Power Switch
OFF to turn your Moxie off.
Note:
Lid must be on the Jar for the
Moxie to turn on.
Time Setting
Press the up and down arrows
on your Moxie to increase or
decrease the time on the display.
00:15
14
14
instructions
• Times are displayed in minutes
and seconds.
• Blending times can be adjusted
when using any setting.
Example:
Press Power button. Turn dial to
Ice. 00:15 (15 seconds) will be
displayed. Press up and down
arrows to adjust the time. Press
Start/Pause.
Numbered Settings
For standard blending you can
select your blending speed from
one of the numbered settings
between 1 and 10.
1.
Turn the dial to your desired
setting between
1 and 10.
2.
Adjust the time, if desired,
then press Start/Pause
to begin blending at your
selected setting.
3.
Adjust the number setting
using the dial at any point
while blending, if needed.
Pulse 1 & Pulse 2
You can use either Pulse 1
or Pulse 2 for quick bursts of
high-powered blending.
• Pulse 2 will have a higher RPM
than Pulse 1.
• When using either Pulse 1 or
Pulse 2, the LED display will
show the default time that you
set the dial to and will remain
displayed until you change the
setting.
Tabla de contenido
