BD Veritor Plus Instrucciones De Uso página 36

BD Veritor™ Plus Analyzer Instructions for Use
Result Number
none
none
none
none
none
none
none
* outside of the United States contact your local BD representative
36
Message Possible Cause(s)
INVALID An invalid kit lot barcode was
KIT LOT detected by the BD Veritor™
BARCODE Plus Analyzer.
OPERATOR ID
SCAN TIMEOUT No barcode was scanned
REINSERT within 30 seconds.
TEST DEVICE
SPECIMEN ID
SCAN TIMEOUT No barcode was scanned
REINSERT within 30 seconds.
TEST DEVICE
LOT NUMBER
SCAN TIMEOUT No barcode was scanned
REINSERT within 30 seconds.
TEST DEVICE
The shelf or operational life
of the BD Veritor™ Plus
Analyzer is nearing
expiration. The maximum
XXX DAYS shelf-life of the BD Veritor™
ANALYZER LIFE Plus Analyzer from the date
REMAINING of manufacture is 34 months
(regardless of time of first
use). The maximum number
of months from first use is
24 months.
The BD Veritor™ Plus
Analyzer is nearing its usage
XXX READS expiration. The maximum
REMAINING number of tests performed by
a BD Veritor™ Plus Analyzer
is 10,000 runs.
Failure of the internal battery.
Battery Not Charging:
In the event the battery icon
does not indicate the battery
is charging while the power
Flashing Plug icon
supply is plugged into the
BD Veritor™ Plus Analyzer,
examine the AC Adapter
plugged into the Analyzer.
The supplied AC Adapter
has a BD label near the
coaxial power connector and
conforms to the sample
labeling in section 2.3.
Corrective Action(s)
Ensure that the barcode scanned during this step is from
a valid BD Veritor™ Test Kit box label. For kits with two
barcodes, scan only the upper barcode that starts with
(17).
Reinsert test device and scan all barcodes within
30 seconds of the display prompt.
Reinsert test device and scan all barcodes within
30 seconds of the display prompt.
Reinsert test device and scan all barcodes within
30 seconds of the display prompt.
Contact your distributor to order a new BD Veritor™ Plus
Analyzer*.
The duration of the message is two seconds. To clear the
message immediately, insert a test device to begin a new
run.
Contact your distributor to order a new BD Veritor™ Plus
Analyzer*.
The duration of the message is two seconds. To clear the
message immediately, insert a test device to begin a new
run.
Contact BD*.
Note: the Analyzer may continue to be used while
plugged into a facility power source.