Bd Veritor Plus Connect Set Up - Optional; Bd Veritor Infowifi Module Setup - Optional - BD Veritor Plus Instrucciones De Uso

4 Slide the module bay cover off of the Analyzer. The module bay cover should be stored in a secure location.
5 Remove protective plastic cover from the module interface pins if present.
6 Align the module alignment features to the Analyzer track.
7 Slide the module into the Analyzer until an audible click is heard.
8 The Analyzer is now ready for operation. See section 4.6 for optional configuration instructions.
2.7 BD Veritor™ Plus Connect Set Up – Optional
The BD Veritor™ Plus Connect accessory utilized together with a barcode reader equipped module allows secure transmission of test
results to a facility LIS. Additional IT setup is required in order to install and utilize the BD Veritor™ Plus Connect accessory. To create or
troubleshoot this connection, please contact your local BD representative. Installation instructions for site IT staff are further detailed in
documentation included with BD Veritor™ Plus Connect.
2.8 BD Veritor™ InfoWiFi Module Setup – Optional
The addition of the BD Veritor™ InfoWiFi module enables the Analyzer to capture barcoded information and integrate it into the test record.
It then allows secure transmission of test results to a facility LIS. The USB cable included with the BD Veritor™ InfoWiFi module can be
used to connect the Analyzer to the BD Veritor™ Plus Connect. In order to complete the connection to a wireless network, additional IT
setup is required. Installation instructions for site IT staff are further detailed in documentation included with BD Veritor™ InfoWiFi.
To install InfoWiFi module:
1 Turn off the Analyzer power.
2 Turn the Analyzer upside down.
Ensure that the power button is not accidentally pressed while the Analyzer is upside down.
3 Depress the locking tab on the module bay cover.
ELECTRICAL EXPOSURE HAZARD. DO NOT TOUCH THE ELECTRICAL CONTACTS INSIDE THE MODULE BAY.
4 Slide the module bay cover off of the Analyzer. The module bay cover should be stored in a secure location.
5 Remove protective plastic cover from the module interface pins if present.
6 Align the module alignment features to the Analyzer track.
7 Slide the module into the Analyzer until an audible click is heard.
8 The Analyzer is now ready for operation. See section 4.6 for optional configuration instructions.
The BD Veritor™ Plus InfoWiFi module does not expire and can be transferred to a different BD Veritor™ Plus Analyzer.
Additional setup and registration steps may be required. See documentation provided with the BD Veritor™ InfoWiFi module.
9 See instructions included with the BD Veritor™ InfoWiFi module for configuration details and associated barcodes.
Power to the Analyzer should remain off during module installation.
CAUTION
WARNING
NOTE
17