Error Codes & Troubleshooting - Veridian Healthcare 01-514 Manual De Instrucciones

ERROR CODES & TROUBLESHOOTING
Problem
Display shows an
abnormal result
Display is blank when
power is on
Display Shows Er 0
Display Shows Er 1
Display Shows Er 2
Display Shows Er 3
Display Shows Er 4
Display Shows Er 5
Display Shows Er 6
Display Shows Er 7
Display Shows Er 8
Display Shows Er A
If your error persists or is not remedied, please contact Customer Care at 866-326-1313
Possible Cause
Cuff position was not correct or was
not tight enough
Body posture was not correct during
measurement
Speaking, excessive movement, angry,
excited or nervous anxiety during
measurement
Batteries may be expired or installed
improperly
Pressure system is unstable before
measurement
Failed to detect systolic pressure
Failed to detect diastolic pressure
Pneumatic system blocked or cuff is too
tight during inflation
Pneumatic system leakage or cuff is too
loose during inflation
Cuff pressure above 300 mmHg
Cuff pressure above 15 mmHg for more
than 3 minutes
EEPROM accessing error
Device parameter checking error
Pressure sensor parameter error
Solution
Apply the cuff properly and attempt a new
measurement
Review the 'Taking a Measurement' portion of
this manual and attempt a new measurement
Wait a period of time and attempt a new
measurement after calm has returned; do not
speak or move during measurement
Check the polarity of the batteries and reinstall
if necessary; replace batteries with new
batteries
Review the 'Taking a Measurement' portion of
the manual, wait a minimum of 5 minutes and
attempt a new measurement.
Review the Applying Cuff portion of this
manual; re-apply the cuff, wait a minimum of 5
minutes and attempt a new measurement.
Check that the cuff is applied properly, wait a
minimum of 5 minutes and attempt a new
measurement. If the monitor still does not
perform or performs abnormally, contact
Customer Care
ENGLISH • 23