I F You Did Not Program Your Local; Call Waiting Caller Id - GE 29472 Manual De Instrucciones

3. To adjust the phone number format, press the REVIEW up or down
arrow button. For instance, a 7-digit local number sometimes cannot be
dialed because it requires a 10-digit or 11-digit format. Press the REVIEW
up or down arrow button to scroll through 7, 10, and 11-digit numbers.
7-digits: 7-digit telephone number (i.e. 555-5555)
10-digits: 3-digit area code + 7-digit telephone number (i.e. 425-555-5555)
11-digits: long distance code 1 + 3-digit area code + 7-digit telephone
number (i.e. 1-425-555-5555)
4. To dial the displayed number, pick up the handset or press DIAL again.
I
F YOU DID NOT PROGRAM YOUR LOCAL AREA CODE IN THE SETUP MENU
1. Press the REVIEW up or down arrow button to display the number
you want to dial. You will only see 10-digit numbers (i.e. 234-555-
1234) in the display.
2. Press DIAL to dial back a number. You may adjust the number format if
TO ADJUST shows in the display.
C W
ALL AITING
This feature allows you to see who is calling when you hear the call
waiting beep in the handset receiver. The CID information appears in the
display after you hear the tone.
• Press the FLASH button to put the current caller on hold and answer the
incoming call.
IMPORTANT: In order to use all of the features of this unit, you must
subscribe to either the standard Name/Number Caller ID Service or Call
Waiting Caller ID Service. To know who is calling while you are on the phone,
you must subscribe to Call Waiting Caller ID Service.
NOTE: Unit displays Call Waiting Caller ID information only for the line
currently in use. The unit will not display Call Waiting Caller ID for a line on
hold or when the unit is in conference mode.
C ID
ALLER
29