Thermador Pro Harmony PALPKITHW Manual De Instrucciones página 15

4. Flip the hinge forward until seated on the bracket. A
screwdriver may be required to carefully push the clip
back.
5. Close and open the door slowly to ensure it is
correctly and securely in place.
Removing the kick and front panels
1. Remove the kick panel screws using a T-20 torx
screwdriver.
2. Remove the front panel screws using a T-20 torx
screwdriver.
Changing the bake burner orifice
Description Main oven bake Aux oven bake
Pro Grand 1.40 mm (140)
Pro Harmony 1.34 mm (134)
To change the bake burner orifice
1. Remove the bake gas line using a 13/16'' box end
wrench, while restraining the elbow fitting from
rotation using an adjustable wrench.
IMPORTANT: DO NOT bend the bake burner tube or
shutter. Ensure that the bake orifice is aligned to the
center of the burner tube inlet.
2. Hand twist the orifice elbow (a) while restraining the
bake orifice (b) from rotation using an adjustable
wrench.
a. Orifice elbow
b. Bake orifice
3. Replace the orifices as indicated in the tables above.
NOTE: The replacement broil orifices have straight
threads (not tapered threads) and DO NOT require thread
sealing compound.
4. Perform a gas leakage check of the orifice and
associated supply tube fittings, per the "Check for gas
leaks" section of these instructions.
1.13 mm (113)
1.13 mm (113)
b
a
Page. 15