Pump Maintenance
Important: Cleaning the Pump is essential to the longevity of the Pet Fountain as well as
the cleanliness of the water. Clean the Pump at least every two weeks. Warranty may be
voided if the Pump is not cleaned regularly.
1. Remove Pump from the Pet Fountain as explained in the "Filters and Pet Fountain
Cleaning" section of this Operating Guide.
2. Once the Pump is out of the Pet Fountain, with your thumb
and forefinger, gently squeeze on either side of the
Faceplate, and pull it off. It may be necessary to insert a
fingernail into the seam of the Faceplate to pry it
off (Fig. 17).
3. Next remove the Intake Plate by
placing your fingernail under the
small lip located on the narrow
side of teardrop-shaped Intake
Plate Pull-Tab and pull out to
remove (Fig. 18).
4. Once the Intake Plate is removed
you can also remove the Impeller
(white, 3-bladed propeller) which
is held in place magnetically.
To remove the Impeller, insert a
fingernail or other slim object
underneath the plastic blade and lift
out of Pump (Fig. 19).
Pump
Impeller
www.petsafe.net
Intake Plate
Intake Plate
Pull-Tab
Fig. 18
Faceplate
Fig. 17
Fig. 19
11