9. Once the Pet Fountain is completely disassembled, you will have three plastic
parts: the Lid, Housing, and Bowl.
10. Handwash the Pet Fountain plastic parts with warm water and soap. The Pet
Fountain may also be cleaned with a diluted vinegar solution (20% white vinegar
and 80% water). Important: Be sure to rinse thoroughly with fresh water. You
can also put the Pet Fountain in the top rack of the dishwasher. Remove the Pump
before placing the Pet Fountain in the dishwasher. DO NOT PLACE PUMP IN
DISHWASHER! If possible, it is recommended that you turn down the heat of
the water inside the dishwasher. See the "Pump Maintenance" section of this
Operating Guide for detailed instructions on how to properly clean your Pump.
1 1. If you have trouble reaching certain spots or hard-to-reach corners, try using
a cotton swab or purchase the Cleaning Kit, a 3-Piece Brush kit. To purchase a
Cleaning Kit, visit our website at www.aquapetfountain.com to locate a retailer
near you or to find a listing of Customer Care Centre telephone numbers for
your area.
Pump Maintenance
In-line Plug
NOTE
Cleaning the Pump is essential to the longevity of the Pet Fountain, as well
as the cleanliness of the water. Clean the Pump every two weeks. Warranty may be
voided if the Pump's motor is not cleaned regularly.
10
Pump
Impeller
www.aquapetfountain.com
Stator
Faceplate