Locking The Safe - STACK-ON SHD-SU-BG-E Manual De Instrucciones

BACK UP KEY
A "Back Up Key" has been provided in case you
have forgotten or lost your security code. To
open the safe using the back up key follow the
steps below:
1. Remove the cover by pressing the tab and
turning the cover as shown in the illustration.
The lock can hang by the connecting cable while
unlocking the safe.
TAB
2. Insert the key in the key hole and turn
clockwise 1/4 turn (until stopped) in order to
unlock the safe. Rotate the handle and
open the door
3. Keep the door open until you have entered a
new security code. Before entering your new
code, remove the key and screw the cover back
in place.
4. Enter your new security code following the
instructions for entering your security code.

LOCKING THE SAFE

To lock the safe, close the door and rotate the
handle clockwise until it stops. If the handle is
not turned until it stops, the locking
mechanism will not lock.
NOTE ON LOCKING THE SAFE:
Because the locking mechanism is deactivated
for approximately 3 to 6 seconds after the
combination is entered, wait a minimum of 6
seconds from the time the combination is
entered to lock the safe.
TURNING THE KEYPAD SOUND OFF/ON
You can turn off the "Beep" sound of the keypad by
entering the code
To turn the "Beep" sound on, enter the code
6 3 3.
40718-1704
6 6.
4
16