Dyna-Glo DGB730SNB Manual De Instrucciones página 13

ASSEMBLY INSTRUCTIONS
12. Insert the bottom hinge pin of left door assembly
(15) into the hole (labeled as AA) on bottom shelf
(1). Press the hinge pin on the top of left door
assembly (15) by hand and insert into the hole
(labeled as BB) of upper front brace (11).
Repeat the same with right door assembly (14).
13. Carefully place the grill body (24) onto the cart left
side panel and cart right side panel (13 & 5). Adjust
the grill body (24) so that the holes in the grill body
(24) are aligned with the holes in the tabs of the
cart side panels (13 & 5). NOTE: Make sure the gas
hose is inside the cart. Fasten the grill body (24) by
usingtwoM6x12screws(A)andplainwasher(B)
on each side.
Hardware Used
A
M6x12Screw
B M6 Plain Washer
12
13
AA
1
13
13
x4
x4
13
Hinge pin on the
top of the door
BB
11
24
5
B
A