Dyna-Glo DGB730SNB Manual De Instrucciones página 10

ASSEMBLY INSTRUCTIONS
8. Preassemble cart front vertical beam (8) and upper
front door brace (11) as "T" shape assembly. Insert
twoM6x12screws(A)intoeachofthetopmounting
holes (labeled as AA) on the cart left side panel and
cart right side panel (13 & 5), leaving 4-6mm
clearance from screw head to the cart left side panel
and cart right side panel (13 & 5). Attach the Cart
front vertical beam (8) and upper front door brace
(11) assembly by placing the key holes over the
inserted screw head (A) on the side panels (13 &
5), slide the upper front door brace (11) so that the
screw head is over the smaller hole. Secure the
screws, but do not tighten completely this time.
SecureanothertwoM6x12screwsintoholes
(labeled as BB). Finally, secure the cart front vertical
beam (8) to bottom shelf (labeled as CC) by using
twoM6x12screws(A).
Hardware Used
A
M6x12Screw
8
5
x6
10
AA
BB
CC
A
1
13
8