Dyna-Glo DGB730SNB Manual De Instrucciones página 8

ASSEMBLY INSTRUCTIONS
4. I nsertoneM6x12screw(A)intoeachoftherear
holes of the cart right side panel and cart rear vertical
beam (5 & 10), leaving 4-6mm clearance from screw
head to the right side panel and cart rear vertical
beam (5 & 10). Attached one of the cart rear panels
(12) by sliding the keyholes in the cart rear panel
over the inserted screws and then push with force.
Secure the cart rear panel (12) to the bottom shelf
(1)byusingtwoM6x12screws(A).Tightenthetwo
M6x12screwsoncartrightsidepanelandcartrear
vertical beam (5 & 10).
Hardware Used
A
M6x12Screw
5. I nsertoneM6x12screw(A)intoeachoftherear
holes of the cart left side panel and cart rear verti-
cal beam (13 & 10), leaving 4-6mm clearance from
screw head to the cart left side panel and cart rear
vertical beam (13 & 10). Attach the other cart rear
panels (12) by sliding the keyholes in the cart rear
panel over the inserted screws and then push with
force. Secure the cart rear panel (12) to the bottom
shelf(1)byusingtwoM6x12screws(A).Tightenthe
twoM6x12screwsoncartleftsidepanelandcart
rear vertical beam (13 & 10).
Hardware Used
A M6x12Screw
4
12
x4
1
5
13
13
x4
8
10 5
12
10
12
A 12
A
5
1