Dyna-Glo DGB730SNB Manual De Instrucciones página 28

CARE AND MAINTENANCE
Removing the Gas Burner Assembly
1. Make sure all control knobs are in the OFF
position, gas supply valve is closed, and the gas
hose is disconnected from the gas supply.
2. Open lid and remove warming rack, cooking
grates, and heat tents.
3. Remove hinge pins at back of burners to detach
burners from brackets (labeled as AA in the
figurebelow).
4.Removescrews(labeledasBBinfigurebelow).
AA
Cleaning the Burner Assembly - Make sure the grill is cool
1. Ensure all burner ports are clear of clogs. Use of a pin or paper clip works well.
2. Ensure burner is free of any damage. If damage is found, replace with new burner.
3. Ensure the end of the burner and primary air screen are clear from insect nests, dirt or debris.
Re-installing the Burner
•Ensurethegasvalveorificesarecorrectlypositionedinsideburnerinlet(venturi).
•Theuseofaflashlightmaybenecessarytoensurethecorrectposition.
•Itisrecommendedtoviewthecorrectpositionthroughthefireboxventholesasillustrated.
View the correct position from
thebottomofthefirebox.
If the instructions above are not followed, a fire or explosion may result, possibly causing serious
bodily injury or death.
Cooking
Grates
Heat Tents
BB
Correct
WARNING
28 28
Warming Rack
Bottom View
Incorrect Incorrect