Dyna-Glo DGB730SNB Manual De Instrucciones página 16

ASSEMBLY INSTRUCTIONS
17. First, Secure 2 shoulder screws (E) into holes of side
table supports (25) as shown. Secure side table (19)
onto side table support (25) by tightening 2 shoulder
screws (E) into holes as shown. Repeat step with the
other side table.
Hardware Used
E
M6 Shoulder Screw
WARNING: IT IS VERY IMPORTANT TO CHECK
AND ENSURE THAT EACH AND EVERY BURNER
IS FULLY ENGAGED WITH THE ADJACENT VALVE
ORIFICE BEFORE COMPLETING STEP 18.
FAILURE TO DO SO
MAY RESULT IN FIRE
OR EXPLOSION,
POSSIBLY CAUSING
SERIOUS INJURY
OR DEATH. REFER
TO MAINTENANCE
SECTION INSTRUCTIONS TO PROPERLY CHECK
THE ENGAGEMENT.
18. Place the heat tent (28) into gas grill body (24).
19. Place the cooking grate (27) into the grill body (24),
then attach the warming rack (26) onto the grill body
(24). Note: The warming rack (26) inserts into the four
holes that on both sides of grill body (24).
17
x8
18
28
19
26
27
16
25
25
E
E
19