Dyna-Glo DGB730SNB Manual De Instrucciones página 12

ASSEMBLY INSTRUCTIONS
10. I nserttwoM6x12screws(A)intoupperfrontdoor
brace (11, labeled as AA and BB), leaving 4-6mm
clearance from screw head to the upper front door
brace (11). Attach the Cart middle cross beam (9)
by placing the keyholes over the screw head (A) on
the upper front door brace (11), slide the cart middle
cross beam (9) so that the screw head is over the
smaller part of keyhole. Secure the screws but do
nottightencompletelythistime.InstalloneM6x12
screw (A), labeled as CC. Tighten the screws.
Hardware Used
A M6x12Screw
11. R emovepreassembledtwoM6x12screws(A)and
door handle sleeve (18) from the door handle. Insert
the 2 door sleeves (18) into the holes located on the
backofleftdoorassembly(15),inserttwoM6x12
screws (A) into the door handle sleeve (18), through
thedoorhandlebezels(17)andintothethread
holes in the door handles. Tighten the screws.
Repeat with right door assembly (14).
Hardware Used
A M6x12Screw
(Pre-assembled in
cabinet door handles)
View from the back
x3
x4
12
10
9
AA
CC
11
15
17
16
17
BB
18
A
18