Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Problem
The oven lamp does not op-
erate
The pyrolysis function does
not operate (the time display
shows "AS")
The time display shows "Py-
ro"
The time display shows an
error code which is not in
the list
Steam and condensation
settle on the food and in the
oven cavity
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
INSTALLATION
Warning! Refer to "Safety information"
chapter.
Building In
Possible cause
The oven lamp is defec-
tive
Shelf support rails/oven
shelf runners are not re-
moved
The oven needs pyrolytic
cleaning
Electronic error
You left the dish in the
oven for too long
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the oven cavity.
Remedy
Replace the oven lamp
Remove shelf support rails / oven shelf
runners
Start the pyrolytic cleaning process
Switch the appliance off and on again
through the fuse or the safety switch in
the fuse box. If the display shows the
error message again, refer to the Serv-
ice Force Centre
Do not leave the dishes in the oven for
longer than 15-20 minutes after the
cooking process ends
.........................................
.........................................
.........................................
50
electrolux 17
Capítulos
Tabla de contenido
