What To Do If - Electrolux EOC55200 Manual De Instrucciones

16 electrolux
7. Carefully lift (step 1) and remove (step 2)
the panels of glass one by one. Start
from the top panel of glass.
1
Clean the glass panels with water and
soap. Dry the glass panels carefully.
Installing the door and the glass panels
When the cleaning is completed, install the
glass panels and the oven door. Do the
above steps in the opposite sequence.
The middle panel has a decorative frame.
When you install this panel, make sure that
the screen-printing zone looks to the inner
side of the door. Make sure that after the

WHAT TO DO IF...

Warning! Refer to "Safety information"
chapter.
Problem
The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven does not heat up
installation the surface of the glass panel
frame on the screen-printing zones is not
rough when you touch it.
Make sure that you install the middle panel
of glass in the seats correctly (refer to the il-
lustration).
90°
Make sure that you install the top panel of
glass in the seats correctly (refer to the illus-
tration).
2
Possible cause
The oven is not switched
on
The clock is not set
The necessary settings
are not set
The fuse in the fuse box is
released
Remedy
Switch on the oven
Set the clock
Control the settings
Control the fuse. If the fuse is released
more than one time, refer to a qualified
electrician.