Lubricant Table; Mounting Rims On Wheel Gear For Tyred Vehicles; Rim Mounting; Wheel Rim Tightening - brevini RDF159 Manual De Instalación Y Mantenimiento

7.3 Lubricant table:

Lubrificant
ISO VG 150
Agip Blasia 150
Aral Drgol BG 150
BP Energol GR-XP 150
Castrol Alphamax 150
Cepsa Engranajes HP 150
Dea Falcon CLP 150
Elf LubMarine Epona Z 150
Esso Spartan EP 150
Fuchs Renep Compound 104.
Fuchs Lubritech Gearmaster CLP 150
Klüber Klüberoil GEM 1-150
Mobil Mobilgear XMP 150
Nils Ripress EP 150
Omv Gear HST 150
Optimol Optigear BM 150
Q8. Goya NT 150
Repsol Super Tauro 150
Shell Omala 150
Texaco Meropa 150
TotalFinaElf Carter EP 150
Tribol 1100 - 150
Synthetic oil with polyalphaolephines
Lubrificant
ISO VG 150
Agip -
Aral Drgol PAS 150
BP Enersyn EXP 150
Castrol Alphasyn EP 150
Cepsa Engranajes HPX 150
Dea Intor HCLP 150
Elf LubMarine -
Esso Spartan SEP 150
Fuchs Renolin unisyn CLP 150
Fuchs Lubritech Gearmaster SYN 150
Klüber Klübersynth EG 4.-150
Mobil MobilgearSHC XMP 150 MobilgearSHC XMP 150 MobilgearSHC XMP 150
Nils -
Omv -
Optimol Optigear synthetic A 150 Optigear synthetic A 150 Optigear synthetic A 150
Q8. El Greco 150
Shell Omala HD 150
Texaco Pinnacle EP 150
TotalFinaElf Carter SH 150
Tribol 1510 - 150
8. MOUNTING RIMS ON WHEEL
GEAR FOR YRED VEHICLES

8.1 Rim mounting:

When mounting wheel rims, make sure that the
rim connection holes are properly aligned with the
gear unit stud bolts to prevent the rim from bumping
Mineral oil
ISO VG 220 ISO VG 320
Blasia 220 Blasia 320
Drgol BG 220 Drgol BG 320
Energol GR-XP 150 Energol GR-XP 150
Alphamax 220 Alphamax 320
Engranajes HP 220 Engranajes HP 320
Falcon CLP 220 Falcon CLP 320
Epona Z 220 Epona Z 320
Spartan EP 220 Spartan EP 320
Renep Compound 106 Renep Compound 108.
Gearmaster CLP 220 Gearmaster CLP 320
Klüberoil GEM 1-220 Klüberoil GEM 1-320
Mobilgear XMP 220 Mobilgear XMP 320
Ripress EP 220 Ripress EP 320
Gear HST 220 Gear HST 320
Optigear BM 220 Optigear BM 320
Goya NT 220 Goya NT 320
Super Tauro 220 Super Tauro 320
Omala 220 Omala 320
Meropa 220 Meropa 320
Carter EP 220 Carter EP 320
1100 - 220 1100 - 320
ISO VG 220 ISO VG 320
Blasia SX 220 Blasia SX 320
Drgol PAS 220 Drgol PAS 320
Enersyn EXP 220 Enersyn EXP 320
Alphasyn EP 220 Alphasyn EP 320
Engranajes HPX 220 Engranajes HPX 320
Intor HCLP 220 Intor HCLP 320
Epona SA 220 Epona SA 320
Spartan SEP 220 Spartan SEP 320
Renolin unisyn CLP 220 Renolin unisyn CLP 320
Gearmaster SYN 220 Gearmaster SYN 320
Klübersynth EG 4.-220 Klübersynth EG 4.-320
Atoil synth 220 -
Gear SHG 220 Gear SHG 320
El Greco 220 El Greco 320
Omala HD 220 Omala HD 320
Pinnacle EP 220 Pinnacle EP 320
Carter SH 220 Carter SH 320
1510 - 220 1510 - 320
www.comoso.com
against the head of the stud bolts because this would
ruin the thread but may also cause them to come
out of their seats, thus making it more difficult to mount the
wheel rim.
Once the stud bolts have entered the rim holes, to push
the wheel rim into its seat, pry under and lift it a few mm to
prevent the rim from sliding on the threads of the stud bolts
and damaging them.

8.2 Wheel rim tightening:

To tighten the wheel rims onto Brevini gear units, use only "DIN
7.4.361 - H - 10" type nuts such as those supplied together with
the gear units, applying a torque to those nuts at the value
reported in the "Bolt Torque Setting Table" (see paragraph 9..3).
ATTENTION: these torque settings must be checked after
the vehicle has traveled a short distance.

9. CHECKS

ATTENTION: Given the type of brake, the operating pressure
should never drop below the minimum brake opening pres-
sure to avoid the braking action.
ATTENTION: The gear units are shipped without oil.
The customer is responsible for filling such devices
(see lubrication chapter 7.).
9.1 First start-up checks: wheel gear for tyred
vehicles
Before starting the machine check that all the oil levels are
correct.
- For the wheel gear units with a multi-disc brake, check that
the operating pressure of the hydraulic circuit (see table on
the right) is sufficient to fully open the multi-disc brake to avoid
overheating and any premature wear of brake discs.
33