Operation; Stop; Control; Contol Panel - Parker PSE1400 Manual De Uso

case the air exits the dryer cabinet from the condenser grilles instead
from the fan grille - see par. 8.6 and 8.7 for correct air fl ow); immediately
invert two phases.
d) Wait 5 minutes, then slowly & partially open the inlet valve. Let the
dryer reach line pressure before fully opening the inlet valve.
e) Once the dryer is at line pressure and the inlet valve is completely
open, slowly open the air outlet valve; the dryer is now drying.
Phases Monitor
If appears to display the alarm "phase monitor ", during the start up of
the dryer, the user must verify the wiring of the input terminals of the
disconnecting switch of the dryer.

4.3 Operation

a) Always leave the dryer on when the compressor is on and working.
b) The dryer operates automatically , therefore constant fi eld ad-
justment to settings is not required. See section 5 for navigating
controls.
c) In the event of unforeseen excess air fl ows or spikes in moisture
load, by-pass the dryer to avoid overloading it.
d) Avoid inlet air temperature fl uctuations.

4.4 Stop

a) Stop the compressor or the air fl ow through the dryer and wait 2
minutes before shutting down the dryer;
Close the inlet air valve to ensure compressed air does not enter the
dryer when disconnected or if an alarm occurs.
b) Press to switch off the dryer.
The button changes color from green to gray
&
c) Turn the MAIN SWITCH " " to "O OFF" to switch the power off.
Y
Wc version, close the water circuit with the dryer stopped.
English

5 Control

5.1 Contol panel

3.0
MANUAL
DRAIN
Touch buttons Function
Touch ON/OFF
Access to information menu: machine status, pres-
sures, temperatures, general settings, consump-
tion, user password
Access to alarm menu: alarms/warnings and alarm
history.
other information
Fan operation rate
Dew point
trend
3.0
MANUAL
DRAIN
1400-6000 60Hz

5.2 Main menu

Touch
Once a "button" is touched, the outline highlights briefl y to confi rm a
selection has been made.
Touch

5.2.1 Machine status (I/O)

OFF (gray)
Touch
ON (green)
Hot gav valve opera-
tion rate
A color changing indicator provides status of machine inputs/outputs:
active = green light
not active = gray light.
e.g .
Shows
the ON/OFF
drain
touch to move to the second page of I/O statuses.
Touch: for a
manual drain
to enter on "Information" menu:
to exit to home screen.
to enter "machine status" menu.
3/10