LUCCI AIRFUSION CLIMATE II LD52BN Manual De Instrucciones De Instalación página 6

HANGING THE FAN MOTOR ASSEMBLY
Installing Down rod
 Lift fan assembly onto mounting bracket. Fig.4
Ensure the notch of ball joint is positioned on the stopper of mounting bracket to prevent fan from rotating when in

operation. Fig. 5
PREPARE AND COMPLETE THE ELECTRICAL WIRING --- WIRING DIAGRAM
(FIG. 6)
WARNING! FOR YOUR SAFETY ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY A LICENSED
ELECTRICIAN.
NOTE: AN ADDITIONAL ALL POLE DISCONNECTION SWITCH MUST BE INCLUDED IN THE FIXED WIRING.
NOTE: IF THERE IS TWO OR MORE DC CEILING FAN INSTALLED IN THE ONE LOCATION, AN ISOLATION
SWITCH IS REQUIRED FOR EACH CEILING FAN. THIS IS REQUIRED WHEN PROGRAMMING THE REMOTE
AND RECEIVER TO PAIR TOGETHER.
Fig. 6
Fig. 4
6
Fig. 5