Baume & Mercier Clifton 65717 Manual Del Usuario página 18

it means it is midnight, and if the date does not change, it
means it is noon.
DUAL-TIME FUNCTION ADJUSTMENT USING
THE CORRECTOR
W hen operating the corrector buttons, kindly use the
dedicated small tool provided in the watch packaging.
1. Activate the dual-time adjustment mode by pressing the
corrector button (C5) for at least two seconds until the
minutes hand of the second time zone (D) moves one minute
forwards.
2. Set the hours and minutes hands of the second time
zone (D) to the required time by proceeding as follows:
- a brief (less than one-second) press on the corrector
(C5) moves the time forwards in one-minute
increments.
- a medium (from one to two-second) press on the corrector
(C5) move the time forwards in one-hour increments.
- a prolonged (more than two-second) press on
the corrector (C5) moves the time zone forwards
continuously until the corrector is released.
Note : The adjustment mode is deactivated if the corrector is
not touched for a full 10 seconds.
SETTING THE MOON PHASE
The setting of the moon phases on this watch does not have
rapid correction, and thus is accomplished using the time-
setting.
14 |
12
7
1. Pull the crown to Position 3.
2. Turn the crown to advance the hands (A, B) clockwise.
This also has the effect of rotating the moon-phase disc
(I) by jumps (one jump per day).
3. Continue to turn the crown to rotate the moon-phase
disc of (I) by jumps until the full moon appears in the
center of the aperture.
4. Continue turning the crown in order to bring about as
many jumps as there are days passed since the last full
moon (consult a calendar).
5. Reset the crown Position 1.
To know the dates of the full moon and set your watch,
please visit our website www.baume-et-mercier.com and
consult the page corresponding to your model.
CHRONOGRAPH: SIMPLE FUNCTION
P1: Start/stop push-button. Press once to start the
chronograph (F=seconds, G=minutes, J=1/10 second).
Press a second time to stop.
P2: Reset push-button.
To measure several successive times, without counting
i n t e r va l s , p r e s s t h e P 1 p u s h - b u t t o n s e v e r a l t i m e s
consecutively, as follows:
1. Start.
2. Stop and read.
3. Start.
4. Stop and read.
27